The automatic washing machine is a real find for housekeeping. Therefore, when it breaks down, it causes severe stress for the hostess, because it will have to be washed by hand. One of the most common breakdowns in washing machines is that the drum stops spinning. In this case, it is recommended to contact a specialist at a specialized service center.
Actions before the arrival of a specialist
Before a repair technician arrives, if the drum is not spinning, you can take some action.
- Unplug the washing machine from the outlet.
- It is worth carefully draining the water from the drum. If it is very full, do not open the side loading door. You can drain it through the filter located at the bottom of the unit. On some models, the filter is installed at the back or side.
- Remove wet laundry from the drum.
- Turn the device on to drain mode.
- Then remove the plug from the socket again.
- The last step is to dismantle the rear protective cover, if you have the necessary tools.
In some cases, the drum starts spinning and the machine works properly. The reason is the overload of the laundry. If your model is one of the new ones, a warning about this will appear on the display. In other models, overload is not indicated, as a result, the drum in the washing machine will no longer spin.
Common breakdowns
There may be several reasons why the drum does not spin in the washing machine, the most common are listed below:
- The drive belt is damaged . The belt is frayed and broken. The cause of the breakdown is long-term use. Over the years, it weakens and wears out. Another reason is the long downtime. The rubber dries up and loses its elasticity. In some cases, the belt simply flies off and should be put in place. In all other situations, it is replaced.
- Worn out motor brushes . Special brushes are gradually shortened. Therefore, the normal rotation of the motor stops. As a result, the drum of the machine stops. Repair is reduced to replacing brushes.
- Failure of the electronic module . Due to a drop in electricity in the network, the electronic module board may fail. Breakage is solved by flashing or replacing it. Also, the drum stops spinning due to clogged bearings. Such a repair requires the help of a qualified technician.
- Engine malfunction . This is the most expensive repair and requires a significant investment. The final cost is determined after a complete diagnosis. The cause of the breakdown is the short circuit of the winding or its breakage on the rotor / starter.
Regardless of the type of breakdown, do not take any repair actions without a master, this can lead to more serious negative consequences.
Calling service center to repair the washing machine drum
If there is a malfunction in the drum of the washing machine, do not hesitate to contact a specialist. Chennai Service Center will provide highly qualified specialists with experience in the washing machines repair of varying complexity. Moreover, all over Chennai prices for drum repair are quite affordable.
